Tag: Liftronic Pro

zero gravity lifting aids for handling cylinders

Self balancing zero gravity lifting aids for handling cylinders

One self balancing Manipulator with three end-efectors Here’s an  INDEVA® model  Liftronic®Pro equipped with three different end effectors for  grabbing cylinders: one  from the cylinder inner side, another from the cylinder outer side, and another for grabbing the bush to be placed into the cylinder.  The end effector is pneumatically driven by means of a [...]

material-handling-door-glasses-3

Manual handling of doors with glasses

In an industrial vehicles factory the glasses and doors were handled by 2 operators for picking the glass from vertical position, 90° rotation, positioning it on the work table, lifting it, rotating it and placing it on the racks. A work cycle 10 minutes long and repeated several times a day, which involved high product [...]

material-handling-shrinkwrapped-packs

Manual handling of shrinkwrapped packs

A producer of freezing elements, in its shipping department, employs mainly women; they have to manually lift, move and position shrink wrapped packs of freezing elements. During summer production increases and these female operators must lift these packs, which weigh up to 20kg, several times a day with very fast and repetitive work cycles. The [...]

magnet end-effector for handling iron tubes

Lift assist devices with dual magnet end-effector for handling iron tubes

An electronic industrial manipulator (intelligent device for handling) model INDEVA® Liftronic® Pro for handling iron tubes has improved productivity and shortened cycle time. By means of a dual magnet end effector it is possible to grip two tubes at the time. The two magnets are at different heights and the operator can move them upwards [...]